T-bar jamb profile that bridges the glass door edge to a fixed panel, with an 8mm/10mm insertion channel on each side and a 5.5mm reveal gap for smooth door swing.
L-profile wall jamb with an 8mm/10mm glass insertion channel, projecting 8mm off the wall face to seat a frameless shower panel.
Flexible fin seal that bridges the glass door's leading edge to a fixed panel, with an 8mm/10mm channel on each side and a 5mm reveal that closes flush when the door swings shut.
Magnetic closing strip for shower doors meeting at a 90° corner, with an 8mm/10mm glass channel on each side and a 14.5mm overall profile height.
Magnetic closing strip for shower doors meeting at a 135° angle, with an 8mm/10mm glass channel on each side and a 12.5mm profile depth.
Magnetic closing strip for shower doors closing flat at 180°, with an 8mm/10mm glass channel on each side and a 25mm overall profile width.
Two-sided bulb/fin seal strip, 14.5mm overall height with 12mm bulb width on each side, fits a 13mm x 20mm glass insertion channel.
Fin seal for sliding shower doors that bridges an 8mm/10mm fixed panel channel to an 8mm sliding door channel, keeping a 5mm reveal in contact through the full slide travel.
Brush-pile seal that closes small gaps on sliding shower panels while allowing smooth travel.
Floor threshold profile with an 8mm/10mm glass insertion channel and an 8mm stand-off leg that seats a frameless panel at the shower floor line.
Get in touch with our team for inquiries, quotations, and bulk orders.
Contact Us